Wenzhou Snbao Weaving Co.,Ltd
Home > Knowledge > Content
Products Categories
Contact Us
Wenzhou Snbao Weaving Co.,Ltd
ADDRESS:Southwest Industry Area, Tangxia Town Ruian, Zhejiang China
MOBILE:+8618057797172
TEL:+86-577-25618286
E-MAIL:
cnsnbao@hotmail.com, snbao@outlook.com
Cutting process of woven fabrics
May 31, 2018

Before cutting, according to the model to draw out the layout, "integrity, reasonable, saving" is the basic principle of nesting.

The main process requirements in the cutting process are as follows:

(1) The quantity of the material is cleared and the defect is avoided. (2) for different batches of dyeing or sand washing fabrics to cut in batches to prevent the same piece of clothing on the phenomenon of chromatic aberration.

For a fabric in the phenomenon of chromatic aberration to carry out the color difference discharge.

(3) The material to pay attention to the fabric of the silk grain straight and the silk thread direction of the garment is in line with the process requirements, for the fleece fabric (such as velvet, velvet, corduroy, etc.) can not be inverted bedding, otherwise it will affect the depth of clothing color.

(4) for the stripe fabric, the material should pay attention to each layer of the bar alignment and positioning, in order to ensure consistency and symmetry on the garment. (5) Cutting requirements of the knife is accurate, straight line smooth.

The shop type must not be too thick, the fabric on the lower floor is not biased.

(6) Cut the cutting edge according to the sample to the bit mark. (7) The use of cone hole marking should be careful not to affect the appearance of clothing. After the cutting to carry out the inventory and inspection of the work, and according to the clothing specifications of stacking, enclosed by the ticket to sign the number, location, specifications and so on.